Choose the right product for your application

Outsdoor-wood-finishes indoor-wood-finishes floor-finishes Specialty-paint
renovaTIONS wood-preparation cleaner-and-sealers  

Rutins Outdoor

Rustins Outdoor Danish Oil – A waterborne blend of natural plant oils and other special ingredients to nourish and protect all types of outdoor timber. Rustins Outdoor Danish Oil has low VOC and low odour during application. Containing UV light inhibitors that protect against sunlight, the oil dries to a low lustre finish. Rustins Outdoor Danish Oil conforms to The Articles in Contact with Food Regulations. Can be used for both interior & exterior application.Clean brushes with water.

Quick Dry Outdoor Danish Oil

Rustin’s Danish Oil

RustinsTEAK OIL – Based on special vegetable oils and resins to give a quick drying penetrating seal to Teak, Cedar and all bare wood. Easily applied with a brush or cloth. Gives an attractive sheen on interior and exterior surfaces.

Teak Oil

Rustin’s Teak Oil

Rustins Garden Furniture Cleaner – is a blend of special cleaning agents to remove dirt, algae, mildew and grease from wooden garden furniture. It cleans and revives wooden garden furniture, prior to re-finishing with Rustins Quick Dry Garden Furniture Oil, or any of the other Rustins’ expert exterior wood finishes. Just spray a small amount of cleaner onto the furniture – then use a damp cloth, sponge or scrubbing brush to remove any stubborn stains, algae or mildew.

 Garden Furniture Cleaner

Rustin’s Garden Furniture Cleaner

Quick Dry Garden Furniture Oil – This food safe water-borne oil is a blend of natural oils and other special ingredients that nourish, protect and enhance your wooden garden furniture. Rustins Garden Furniture Oil dries with a low gloss sheen. It is a penetrating oil that dries to a hard, durable and water-resistant seal that brings out the beauty of the grain within the timber. It contains UV light inhibitors that protect against sunlight. Available in 500ml and 1 Litre

Garden Furniture Oil

Rutin’s Garden Furniture Oil

Rustins Outdoor Clear Varnish – A quick drying, durable, clear coating available in gloss and satin. Gives long lasting protection to all external wood, and is touch dry in 30 minutes, re-coatable in 4 hours.

Rustins Outdoor Clear Varnish

Rustin’s Outdoor Clear Varnish

Rustins Outdoor Wood Stain – A quick drying, durable, exterior stain available in gloss and satin.  Gives long lasting protection to all external wood, and is touch dry in 30 minutes, re-coatable in 4 hours. Available in 7 attractive wood shades

Outdoor Wood Stain

Rustin’s Outdoor Wood Stain

DECKING STAIN & SEAL – Quick Drying Rustins new Decking Seal & Stain is a quick drying waterborne stain which dries to a tough, water resistant, matt finish

Decking Stain and Seal

Rustin’s Decking Stain and Seal

DECKING CLEANER – Rustins new Decking Cleaner is the ULTIMATE product for cleaning and reviving weathered garden decking. It is ideal for removing dirt, grease and stains prior to treatment with Rustins Decking Stain & Seal or Rustins Decking Oil. Quick Drying Rustins new Decking Seal & Stain is a quick drying waterborne stain which dries to a tough, water resistant, matt finish

Decking Cleaner

Rustin’s Decking Cleaner

DECKING OIL – Rustins new Decking Oil is a hard-wearing, water resistant oil that retains the colour of the decking. It contains ultra violet light inhibitors and biocides which protects the oil from mould and algae growth

Decking Oil

Rustin’s Decking Oil

YACHT VARNISH – Specially formulated on Tung Oil to give maximum protection and durability to marine and other external woodwork with. Available in Gloss and Satin. Has excellent adhesion and will not flake or peel when correctly applied. Ideal for exterior doors and window frames.


Rustins Yacht Varnish

Indoor Wood Finishes

Back to Top

DANISH OIL – An oil finish, suitable for all types of wood. It differs from Teak Oil in that it contains special ingredients, which prevent it drying to a gloss. It is an easy to use wipe on finish, which brings out the beauty of the timber and gives a natural, open grained, soft lustrous finish. Ideal for all woods and is excellent on turned woodwork. Danish Oil is a unique formulation developed by Rustins.

 Indoor Danish Oil

Rustin’s Indoor Danish Oil

Rustin’s Worktop Oil is a unique water-borne blend of natural plant oils and other special ingredients which nourishes and protects all types of timber. It is a quick-drying wooden work surface treatment, leaving a durable and water-resistant seal which is not vulnerable to scratching or chipping. Rustin’s Worktop Oil is solvent free and conforms to the UK Articles in Contact with Food Regulations and is suitable for the kitchen or in any other food-related environment. Plant oils used in its formulation originate from sustainable sources. One litre will cover around 13 square metres per coat depending on the absorbency of the wood.

Worktop Oil

Rustin’s Worktop Oil

Rustin’s Quick Drying Clear Varnish – A clear hard wearing coating for all interior woodwork which has the least effect on the colour of the wood. Low odour, non-toxic and touch dry in 20 minutes; re-coatable in 2 hours. Clean brushes in water. Available in gloss, satin and matt finishes.
Rustin’s Quick Drying Coloured Varnish – Available in 7 attractive wood shades in gloss and satin finishes. Touch dry in 20 minutes and re-coatable in 2 hours. Suitable for all interior woodwork. Clean brushes in water

Coloured Varnish

Rustin’s Quick Drying Coloured Varnish

CLEAR POLYURETHANE VARNISHES – Clear varnish in gloss, satin and matt finishes. A tough and durable finish for all woodwork and cork. Apply 2-3 coats for the perfect finish. Re-coating time 2-8 hours. Can also be applied over Rustin’s Wood Dyes.

Polyurethane Clear Varnish

Rustin’s Polyurethane Clear Varnish

Coloured Polyurethane Coloured Varnish – A range of 7 attractive natural wood shades in gloss and satin finishes. Stains and varnishes in one operation.

Coloured Polyurethane Varnish

Rustin’s Coloured Polyurethane Varnish

SHELLAC SANDING SEALER – Manufactured from Pure Shellac and alcohol with a special additive included to facilitate sanding when dry. It is also used to seal wood before waxing and to seal wood dyes to prevent bleeding.



BUTTON POLISH – Manufactured from refined shellac dissolved in industrial alcohol. More orange in appearance than French polish



FRENCH POLISH – Traditional French Polish is made from shellac and industrial alcohol.

French Polish

Ruistin’s French Polish

WHITE POLISH – Made with bleached white shellac. Used for bleached or light coloured woods to keep the colour as natural as possible. Also ideal for sealing wood prior to waxing.

White Polish

Rustin’s White Polish

Rustins Clear Natural Beeswax is a blended polish of the highest quality, mostly used for finishing sealed or previously polished wood.


Rustin’s Beeswax

WOOD DYE – For use on bare wood prior to finishing with any of Rustin’s wood finishes. Quick drying penetrating stain, does not raise the grain. Supplied in 11 shades, which may be intermixed to make an infinite variety of natural wood shades. Suitable for interior and exterior use.

 Wood Dye

Rustin’s Wood Dye

 Floor Finishes

Back to Top

 Floor Shine – Rustins floor shines are specially formulated for use on flooring. Laminated Floor Shine is for use on laminated floors, whilst Multi-Purpose Floor Shine can be used on wood, cork, vinyl and lino flooring. Low odour, easy application and quick-drying. Leaves a brilliant shine without buffing. Drying time 10-20 minutes. Leave for 24 hours before re-coating. Wash equipment in water.

 Floor Shine

Rutin’s Floor Shine

Plastic Floor Coating – A two-part cold cure lacquer with excellent adhesion and durability. Almost colourless and will not craze or yellow on ageing. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1-11/2 hours, floor can be used 2 hours after last coat has been applied. Available in Gloss and Satin finish.


Rustin’s Plastic Floor Covering

 QUICK-DRYING FLOOR PAINT – Rustin’s Floor Paint is based on a high quality self cross linking waterbourne acrylic. It is non-flammable with a low odour. Touch dry in 30 minutes Clean brushes in water. Available in Red, Green & Grey. The perfect long lasting paint finish for concrete, brick and stone floors – garages, utility rooms, porches and patios.

Floor Paint

Rustin’s Quick Drying Floor Paint

 Specialty Paints

Back to Top

 BLACK MATT PAINT – A tough and durable finish, high quality water based paint. Suitable for interior and exterior use.

Matt Black Paint

Rustin’s Quick Dry Matt Black Paint

 QUICK-DRYING ALUMINIUM PAINT Suitable for both interior and exterior use. Touch dry in 2 hours. Can be applied to bare wood and metal or over primers. Clean brushes in water.

Aluminium Paint

Rustin’s Quick Dry Aluminium Paint

 QUICK-DRYING BLACKBOARD BLACK Blackboard Black provides a matt black non-reflective surface for blackboards and photographic work. Suitable for interior and exterior use. Clean brushes in water.



 BRICK AND TILE PAINT Specially formulated on high quality alkyd resins and micronized pigments. Bonds exceptionally well to brick and tile, producing a durable and weather resistant matt finish. Ideal for interior and exterior use.



 QUICK-DRYING GOLD PAINT – Suitable for interior & exterior use. Touch dry in 2 hours. May be applied to wood and metal and over painted surfaces. Clean brushes in water.



 Rustins High Heat Black is a fast drying decorative paint that can withstand temperatures of up to 600 degrees centigrade. Ideal for application on surfaces that typically witness extreme temperatures, Rustins High Heat Paint can be used on barbecues, wood burning stoves, fireplaces, grates, chimneys and even car exhausts. The protective product dries is touch dry in just 15 minutes and can be used on all types of surfaces, both indoors and out, leaving a stylish matt finish. It can easily endure typical barbecue temperatures and even roaring fireplace heat, which in the most extreme case rarely exceeds 540 degrees centigrade. Available in Black and Silver.

 High Heat Black

Rustin’s High Heat Black

 Rustins new formula Metal Paint is a low VOC paint for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours. Brushes can be cleaned with water.

Metal Paint

Rustins new formula Metal Paint

Wood Preparation

Back to Top

 Rustins new formula Strypit is a non-caustic dichloromethane-free gel suitable for removing multiple coats of paints and varnishes applied to wood, metal, glass, stone and masonry surfaces. New formula Strypit works best when applied liberally and allowed to penetrate after two applications. The gel consistency permits effective use on vertical surfaces.


Rustin’s Strypit-paint-and-varnish-stripper

CELLULOSE THINNERS A special blend of pure solvents that will mix with any make of cellulose lacquer. It does not contain any xylol, toluene or any other petroleum derivative and is not classified as a petroleum mixture.Knotting for sealing knots, resinous and creosoted timber to prevent bleeding through paint film. Sandpaper surface smooth before applying liberally over knots and surrounding area. Do not sandpaper knotting once applied. Resinous and creosoted timber should be sealed completely with 2 coats. Allow 1 hour to dry before priming. Clean brushes with methylated spirits. Knotting should not be used under polyurethane clear varnishes or water based varnishes and water based paints. Based on pure shellac and alcohol.

Cellulose Thinners

Rustin’s Cellulose Thinners

 Cleaners and Sealers

Back to Top

 MDF CLEAR SEALER* A quick drying, clear sealer that allows the application of both paints or varnishes, unlike white MDF sealers which can only be painted. Touch dry in 30 minutes and can be re-coated in 2 hours. Clean brushes in water.

MDF Sealer

Rustin’s MDF Sealer

 RAW LINSEED OIL – A natural nourishing treatment for wood, including cricket bats, and as a lubricant for french polishing. Also used for softening putty that has become stiff.

Raw Linseed Oil

Rustin’s Raw Linseed Oil

 Rustins UPVC Cleaner is a blend of ingredients to clean and restore all types of white UPVC that are weather stained, dirty and dull. It cleans and revives UPVC doors, windows, fascias, cladding and plastic garden furniture. The UPVC Cleaner removes ingrained dirt and restores gloss.

Rustins UPVC Cleaner

Rustins UPVC Cleaner

BOILED LINSEED OIL Boiled linseed oil is used for finishing most bare timber and suitable for replacing the natural sheen that wood can lose after long periods drying in the sun. Boiled linseed oil contains special additives which speed the drying process. Will also waterproof ground sheets and tarpaulins.




Back to Top

 LIQUID WAX – Is a non-flammable and non-toxic wax emulsion containing pure beeswax and carnauba wax. It can be used with complete safety on all new and old furniture after cleaning off old previously applied wax with the surface cleaner. It is not suitable for use on bare wood.

Liquid Wax

Rustin’s Liquid Wax

 BRASS RESTORER Ideal for restoring exterior brass door furniture, which may be cleaned by applying Rustins Brass Restorer with a brush or dipping small items. Also may be used for cleaning copper and bronze.

Brass Restorer

Rustin’s Brass Restorer

 Rustins Ring Remover is a mixture of fine abrasives that will remove water and heat mark damage from a range of polished surfaces such as lacquers, varnishes and French Polish. Ring Remover will also restore the gloss and remove minor defects from finishes.

 Rustins Ring Remover

Rustins Ring Remover

 Scratch Cover – Will mask unsightly surface scratches and is manufactured in two shades – one for light furniture and one for medium to dark coloured furniture. All the renovators are labelled with full instructions

 Scratch Cover

Rustin’s Scratch Cover

 FINISH REVIVER – If the original finish has lost its lustre or has fine surface scratches, the Finish Reviver with restore the gloss and remove minor surface defects. Water marks and heat marks can also be removed unless they have penetrated right through the finish to the wood. If unfortunately this has happened, the only remedy is to remove the old finish completely with Strypit Paint and Varnish Stripper and re-finish.

Finish Reviver

Rustin’s Finish Reviver

Back to Top